RosenbergerMT ferrule array · IEC 61754-7 · EIA/TIA 604-5

MTP®/MPO Connectorthe parallel-optics standard, 12 to 72 fibres

The MTP®/MPO is the low-loss multi-fibre connector behind parallel optics: up to 72 fibres on n × 12 fibre MT ferrules, with strain relief and bend protection for round cables. Rosenberger OSI was Europe’s first MTP® cabling system manufacturer, IBM-qualified since 1997.

Fibres per connector
12 to 72
Ferrule
MT · n × 12 / n × 16
Insertion loss
≤ 0.25 dB PURE
Since
Europe’s first, 1997
MTP®/MPO Connector

Official Rosenberger OSI product photography.

In depth

The parallel-optics standard, 12 to 72 fibres.

Multimode MTP®/MPO connectors are polished to the global standard PC 0°, and up to 12 fibres also APC 8°; singlemode connectors are APC 8° for higher return loss. Gender can be changed per US Conec AEN-1405, and on PC 0° versions the polarity as well.

Four builds cover the applications: the 12-fibre push-pull-boot version for ultra-high-density panels, the field-configurable MTP® PRO, and the n × 12 and n × 16 trunk connectors up to 72 fibres.

From the datasheet

What the connector brings.

Features

  • Multi-fibre connector on MT ferrules, 12 to 72 fibres, male (with pins) and female (without pins)
  • US Conec Elite ferrules across BASIC quality, all-Elite on PURE
  • Insertion loss down to 0.25 dB maximum on PURE quality, 0.15 dB average random-mated
  • MTP® PRO version: pin exchange and polarity change on-field, tool-based, without opening the connector
  • Push-pull boot versions for ULTRA-HIGH-DENSITY patch fields
  • MTP® PRO protection cap: debris-repellent, non-outgassing, halogen-free
  • Centred coding key on n × 12, off-centre key on n × 16 per FOCIS 18
Builds

Four builds, one interface.

Four datasheets, side by side: pick by fibre count and by how much you want to reconfigure in the field.

Rosenberger MTP®-PPB 12 F
MTP®-PPB 12 F

Push-Pull-Boot · 12 fibres

The 12-fibre connector with push-pull boot for round cable, made for ultra-high-density patch fields where fingers need to reach the boot, not the housing.

12 FIL ≤ 0.25 dB PURERL ≥ 70 dB SM PUREUHD panels
Ask about MTP®-PPB 12 F
Specifications

The datasheet, in one view.

Figures are Rosenberger OSI's published values; BASIC and PURE are the two factory quality grades, identified by the part number.

Insertion loss

SM / MM, Elite ferrule, BASIC0.35
SM / MM, Elite ferrule, PURE0.25
MM, Standard ferrule (> 12 F BASIC)0.60

IL per IEC 61300-3-4, Method B, maximum dB; PURE random-mated average 0.15 dB.

Return loss

Singlemode APC 8°55 · 70 PURE
Multimode PC 0°30
Multimode APC 8°50 · 55 PURE

RL per IEC 61300-3-6, Method 1, minimum dB (BASIC · PURE).

Mechanical and environmental

FerruleMT, PPS with glass particles, US Conec Elite / Standard
Mating cyclesmin. 500, IL increase < 0.2 dB
Strain reliefmax. 100 N, cable dependent
Operating temperature-40 °C to +85 °C
Storage temperature-40 °C to +85 °C
Round cable diametersØ 2.0 to 4.5 mm

Colour coding

Singlemode APC 8°Green or yellow housing
Multimode OM3/OM4 PC 0°Black or heather violet housing
Multimode OM4 APC 8°Heather violet housing
Multimode OM5Lime green housing

Exact housing colour follows the assembly specification; pins define gender, not colour.

Where it fits

Typical applications.

Data centre trunk cablingParallel optics, 40/100/400/800GULTRA-HIGH-DENSITY panelsBreakout assemblies

Specifying the connector for a link?

Tell us the fibre type, the panel and the loss budget, and we will confirm the right MTP/MPO build, quality grade and lead time.